Installing 2 NIC On NT Server Pc
I have 1 pc and with NT installed. My question is how to set 1 nic as primary and the other one as secondary?
This pc act as fire wall & proxy. It will monitor all the pc in network.
Networks
I have 1 pc and with NT installed. My question is how to set 1 nic as primary and the other one as secondary?
This pc act as fire wall & proxy. It will monitor all the pc in network.
by russ werner
by mshjohorean
by rcc
As previously said, just install the second NIC. One of these will be your Internal interface (connected to your Lan), the other your external one.Normaly, the Internal one should be the default IP Gateway for your client commputers, as well (and it will not have a Default Gateway itself!). In the NT Network settings, at TCP/IP it will show two adapters. Some settings are shared by the two (DNS), some are not (IP, WINS,). Make sure you disable the WINS and NetBIOS bindings on the External NIC.Usually, smart firewalls would do that or suggest it to you.
I hope this helps.I'll be happy to assist you further if needed.
Regards,
Radu
by mshjohorean
by mshjohorean
This discussion is closed to new replies.
Sort by Trending