Discussion Locked

Internet Access

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Our Netware 6 server installed with two NIC cards. The NIC card with a public IP address connected to the router and the second NIC with a private IP address connected to the hub.
Is there any way to config the server as a router so that the workstations configured with a private IP address ( on same subnet with the private NIC card. The workstations are connected to the same hub) can access the internet?

Thank you very much for your help.

9 replies

by cg it

Does your question mean that your client computers can not access the internet? or is this just a generic "can this be done" question for a two NIC DNS server setup?

by rbgnr111

you'll need to load bordermanager if you want to do something like that.
after that you can use the novell server as a router, or you can use NAT like the other message said.

by budthegrey

For just plain nat, BorderManager is not required. BMger is handy, though, if you want to have proxy, caching, more extensive firewalling & Ip packet filtering, control over who goes where, reverse proxy for web servers, etc..

This discussion is closed to new replies.