See earlier reply. If you are in the 192.x.x.x range you should confine your selves to the 192.168.x.x. range of IP addresses which gives you over 60,000 addresses. If this is not enough, You may use the 10.x.x.x range of IP addresses which gives you over 15,000,000 IP addresses. You should heed the distinction between public vs. private addresses as indicated in the previous post and not use any 192.x.x.x addresses outside of the 192.168.x.x range. Depending on your configuration, using public addresses internally, may prevent you from accessing many public web sites or may take you out to a public web site when you really wanted an internal one. Either situation is bad news.
As the previous answer indicated, it might be a good idea to use a DHCP server of some kind to allocate your internal IP addresses. You could do it as simply as a using a router to assign the internal IP addresses. Because of the size of your operation, you may be better off using an actual internal server to assign the addresses -- you could then include security validation on the requests.
Do not let the students assign their own IP addresses. Require them to get them from the DHCP server -- of whatever fashion you choose. Run their reauests through at least a router that keeps them out of the hospital range (let us say it is 192.168.1.xxx -- note not 192.1.x.x). By keeping them on a different subnet, you will eliminate the interference it appears you are describing.
I suggest you hire a network consultant to help you fix things.
If the students are outside of the internal network, there are more parameters than for which I could possibly provide guidance here in this forum. In that event, you really need to obtain a network consultant to help straighten things out..