Discussion Locked

IP conflict

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I made a Windows 2000 network and connected it to an existing domain to get their DSL Internet. After numerous difficulties, I tried to eliminate the original server and get the new server to pick up all of the clients in both domains. Even with theold server unplugged, however, I still had an IP conflict probably from the router. I have not been able to reconfigure the router. Someone told me there must be a password that I need. Should I try a new router and see if that clears up the IP conflict?

7 replies

by some guy in seattle

From your description, this probably isn't an IP conflict; more likely a MAC conflict. The reason is that the other networking devices have the original server's MAC address against the IP and then all of a sudden there's a new MAC address with thesame IP. You can fix this by clearing the ARP cache on the offended network devices or, if you don't have the password, reboot the other devices.

If anyone complains about not being able to get out to the internet while these devices are rebooting, blame it on "network congestion." :-)

Hope that helps -

by thanetadmin

If u feel that that there is Ip conflict due to router ethernet or wan port , u can very well re-configure the router.But IP conflict results in disabling of one the devices , so pls check the subnet mask of ur Win 2000 network and the valid IPs.Then instead of going to a new router u can reset the router password & re configure the router. By the way what router u use.

Thanks,
Kias

by sistermaryg

You were right! I could reconfigure the router and I did..(all I needed was a paper clip!)..no more problems!! Thank you!

by jgarza

You should check to see if your new server is running DHCP services. This could cause exactly the type of problem you describe. Run winipcg if you have Win98 or ipconfig with 2k or xp and check to see if it is finding correct DHCP server.

This discussion is closed to new replies.