Question Locked

Is someone trying to hack into my server tru FTP?

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a win 2003 server set up on my home network. On this server I run IIS for my FTP site and my HTTP site. In the system event logs I see lots of warning messages which seem to be generating every second. This is what they are:

Source MSFTPSVC; Event ID 100; Description:
The server was unable to logon the Windows NT account 'Administrator' due to the following error: Logon failure: unknown user name or bad password.

I also noticed that usernames 'john' and 'james' were attempted to be logged on to. And by the way those 2 accounts don't even exist on my system.

Is someone trying to hack into my server? And how can I fix it?
I appreciate you taking your time on this. Thank you.

9 replies

by mark

brute password attacks only really work on the admin account because it will not get locked out after a few tries. Make sure your admin password is very strong. You could also try to deny access to the admin account to use the service and setup another user account to perform those tasks. Not sure how to do part 2, but I have seen my server hit for weeks with similar messages.

by dawgit

or a seperate Gateway Machine between your server and the internet. If your sever can be seen outside of your home / office, it will be attacked. It (a server) has value to crackers, they want to use it to send out bad stuff (think spam, or worse). It should be protected inside of an enviroment seperated from the internet. -d

by dr dij

as a $30 cable router won't let them initiate sending packets to your computer to try and crack it.

by dawgit

It would certainly help. If one wanted to get a little creative, all it takes is an old PII machine, 128 to 256 mb RAM, and a 6-8GB HD. Any version Fedora and you'll have one heck of a Block. It might cost a bit more that 30$, but if you had one laying around...
Your correct though, That's all it would take. -d

by vladsl19

Which services should I make sure are being prevented? I don't want to disable my ftp protocol.

by dawgit

I don't know what 'Brand' or type of device you have. The setting will be slightly different form manufacture to manufacture, even model to model. With that said, I'm not going to try to lead you astray by telling you how I have my settings, on my box. What you really want however is not to block, or stop, your FTP server. You just want to deny, or at least control access to it from the outside. If you want / need to access to your FTP from time to time, (as in on the road...) you should have a VPN set-up in place. (naturally with password controls, etc.) If you look for the guide for your device it should help guide you through it. (They are sometimes kind of cloudy however) What I think you'll need to know, is what port you're (your server is) useing for the transfers. Port 21 is one for certain that should be blocked from the outside. This Wiki-Pedia article [ http://en.wikipedia.org/wiki/File_Transfer_Protocol ] should help a bit. (It won't help to link the TCP/IP book I have in front of me, as it's in German. :p ) Like I said, there should be somewhere in your device set-up program, the port blocking funtion set-up. Just where I can't see from here. :D (eyes getting bad, sad part of getting old :( ) Let us know how you make out. -d

by vladsl19

However, I need my FTP to be available for public access. What I found out to be the problem is the Microsoft IIS version of FTP. It seems like it has these well known security holes. I'm uploading Cerberus FTP Server on my server, we'll see how it goes...

by jmlaz06

I was reading this forum on information about FTP servers. I have been running Cerberus for about a year now. I have had no trouble running it. User management is a breeze. I had that similar problem with brute force attacks. I put an access list on Cerberus to only allow certain IP's and DOS attack prevention. I hope your experience with Cerberus is good as mine.

This discussion is closed to new replies.