I am using an HP JetDirect internal print server on an HP Laser Jet printer. It is on a network with about 15 workstations and a Windows 2000 Server running DHCP. The printer is pulling a valid IP address from the DHCP scope I have created and has worked fine for the past year. I just installed a Linksys BEFSR11 router configured for NAT, disabled the DHCP server on the router (because my W2K server handles it), and now no workstation will print to the JetDirect printer. I have also connected my DSL connection to the router. I can ping the address of the printer, but not print to it. I have so far upgraded firmware on the router and the JetDirect card but no luck. Checked Microsoft, HP, and Linksys knowledgebases, but no answers. The printer prints fine if I disconnect the WAN connection from the router, so I know the problem is either in the router or JetDirect card. Please Help!