Discussion Locked

kixtart not mapping drives on 98se

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We are switching from Novell to NT and have been trying to make this kixtart thing work. I've come up with a really quick script to test it, basically on drive that everyone maps and one drive that gets mapped if they are in a group. For some reasonthis service just stopped working. I logged off then back on and now no drives will map. The script will run, but no drives are mapped.
Help!

3 replies

by Member 29244100

Is the problem actually Kixstart or the script itself?

Have you tried taking out the ECHO OFF to see what is/isn't executed in the script?

I'm assuming you're using NET USE J: \\SERVERNAME\SHARE in the login script - does this report any errors? Does the .BAT or .CMD even execute this?

Can the PC you're running from actually find NET.EXE (or KIX32.EXE) in the path?

I've also had problems in the past with 98SE, if the machine starts to try and map drives under the NT Login Script before WINS/DNS has initialised properly, you'll get a Server Not Found type message.

Have you tried running the script from \\DOMAIN-CTLR\NETLOGON share directly from the PC after the bootup has completed?

HTH -

Jason.

This discussion is closed to new replies.