Discussion Locked

lock a workstation if it has not been updated

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Anyone got an idea how I can lock a workstation [on all windows version compatible] if it has not been updated?
TIA
JoelB

3 replies

by erikdr

Well, can be done but depends totally on the techniques that you are using.

1) I presume you have some kind of software/patch distrib mechanism like SMS or standard MS SUS (but then with a cache on your own location).
2) Also I presume that theoretically this distrib mechanism can fail, leading to non-uptodate workstations. If the failure is technical (e.g. poweroff during install), then you should have builtin checks (e.g. in SMS) that makes sure that each failed install gets redone. If it is FUNCTIONAL (user aborting the patch install), and you WANT the LIBERTY for the user to abort, then...
3) You could have a 2nd distrib job, hopefully not abortable by user, which checks the patchlevel. If wrong, it would change a few registry settings effectively 'locking' the workstation. E.g. disabling the redirector cutting all contacts with LAN and Internet.

However doing a repair afterwards might mean using a floppy disk, or logging in as admin.

To summarise: you can only do this update-check if you have swdistrib, and if you have that anyway in most cases you can force an updated state :-)

HTH,

- The Netherlands

This discussion is closed to new replies.