Discussion Locked
0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We have acquired a company that is running a single server NW5.1 lan. How do I integrate them into our NW4.11 multi-server lan. Do I have to upgrade the Master NDS server first?
9 replies
by csn
Yes, the servers holding the Master replica of the [Root] partition for both trees should be the same NetWare version and preferably the same DS version.
For detailed instructions on how to merge two trees I recommend you check Novell TID 10011011 (and 10013529).
http://support.novell.com/search/kb_indexf.htm
Good luck!
by akelch
The question was auto-closed by TechRepublic
by pallan
If the NW5.1 server is running NDS 8, you can't merge trees. Just an FYI.
by akelch
The question was auto-closed by TechRepublic
by shaigh
You don't have to upgrade the Master 4.11 server from 4.11 but you WILL NEED to ensure it is running at least DS Ver 6.10 (I think this is in SP8a). On the 5.1 server it needs to be running the DS 7.xx line NOT DS 8.xx. Suggested DS Ver 7.47.
by akelch
The question was auto-closed by TechRepublic
by shaigh
You don't have to upgrade the Master 4.11 server from 4.11 but you WILL NEED to ensure it is running at least DS Ver 6.10 (I think this is in SP8a). On the 5.1 server it needs to be running the DS 7.xx line NOT DS 8.xx. Suggested DS Ver 7.47.
by akelch
The question was auto-closed by TechRepublic
by akelch
This question was auto closed due to inactivity
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending
Question Locked
Internet connection perfect on PC, not connecting anywhere else
0 helpful
4 replies
Question Locked
Using multi-NIC setup for NAS + router — better than VLAN?
0 helpful
4 replies
0 helpful
5 replies
Question Locked
Unknown device connected to my network
0 helpful
2 replies
Question Locked
How to change public IP without ISP?
0 helpful
2 replies