Discussion Locked

migrating dhcp scope to different subnet

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I would like to move all the addresses on my 192.105.91.0 scope to a new 195.105.90.0 scope. The dhcp server is multihomed, having addresses on both subnets. How can I smoothly migrate the clients' addresses over?

1 reply

by assamite

I'm going to assume that this server is not a firewall / gateway or the such, and that your DHCP scope is on a 24 hour lease!
In which case if you are able to change the IP address on one interface to the new range, alter the old DHCP scope to timeout every 5 mins and setup a new scope in the new range with whatever settings you require (new default GW, router, DNS etc auto assigned). Once this is complete you can simply disable the old scope and if you have changed all fixed IP addresses onyour network(GW, router, fixed server addresses etc) the new scope will be live to DHCP clients after 5 mins timeout. If the DNS and WINS are tied into the DHCP scope then make sure you have altered any fixed DNS and DHCP reservations to be correctand you should be reasonably smooth to changeover. Better to change the current DHCP lease time to 5 mins at least 24 hours prior to actually doing the move to ensure none of the clients retain their current timeout. For Servers just ensure any fixed IP, TCP/IP settings etc are changed.
I.e assume you have a DNS server on 192.105.91.1 and you will change to 195.105.90.1 then make sure any other server has BOTH entires with the 192.105.91.1 first in it's TCP/IP settings, you can go and removethe old entries later. Hope that gives you some ideas.

This discussion is closed to new replies.