Hi All
I am after a bit of advice with my network.
Currently I have got four different subnets, each of these is connected to an interface on my PIX 515.
These are :
eth0/0 – 192.168.100.x – LAN ALL
eth0/1 – 192.168.10.x – DMZ 1
eth0/2 – 192.168.20.X – DMZ 2
eth0/3 – 192.168.30.x – DMZ 3
The problem I have is that my LAN is now running out of addresses, so I want to look to put servers on one range,
desktops on one range and printers on one range.
ie I want to have the LAN on 3 subnets such as :
192.168.100.x – Servers
192.168.101.x – Desktops
192.168.102.x – Printers
My problem is that I am not 100% sure of the best way to do it.
If my existing LAN (192.168.100.x) is using a subnet of 255.255.0.0 do I just change my DHCP scope etc for my
desktops to the new one above and it will all work or is it more involved?
Thanks in advance
Paul