Question Locked

My Pc is now not connected to any network

0 helpful
21 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello

I apologise now for my extreme lack of knowledge when it comes to Pc's but i will try my best to explain my problem

I have a desktop pc that i was using yesterday morning and when i came to use it later that day it came up 'you are currently not connected to any networks' if i go under my Network page there is nothing there, my laptop is working (wireless) so there is no problem with the modem

I spoke to my internet provider and they have suggested that there must be some sort of problem within my desktop pc or my drivers need up dating (using my laptop and transferring it over)

Now the problems I have are....

1. I have no idea where or what my drivers are
2. Even if I did know what my drivers are I have no idea where to find the right updates

The info I have under System (if that helps) is....

Windows vista home premium
Service pack 2

Processor = Intel ( R ) Core ( TM ) 2 Quad CPU Q6600 @2.40GHz 240 GHz

Memory (RAM) 3.00 GB

System Type 32-bit Operating system

If this is not the information needed to find my drivers can you point me in the right direction or if you have any other ideas on how I can fix my problems it would be most appreciated

Thanks for any help you can give me

Stuart

21 replies

by daveaaa3

There are two small status LEDs on the jack. Are they lit up, blinking?

by oh smeg

Has been scrambled by a power spike, so if the LED's Activity Lights on the Network Port are on try unplugging the Modem for about 10 seconds and then plugging it back in.

It may also pay to unplug the Desktop computer and press the Power On Button on the front for 10 seconds as well and then plug it back in and see if that makes a difference.

Before you do anything else.

As for the Drivers you need the Make & Model of the Computer so if it's a HP Something you need that and if it's a White Box a Custom Made unit you need the Make & Model of the M'Board. With that you just look on the Web Site of either the Computers Maker or the M'Board Maker and navigate to the Vista Driver Download Page and download the Ethernet/Network Drivers. ;)

Col

by godhatesme

There are two small status LEDs on the jack. Are they lit up, blinking?

Yes there are 2 lights at the back, the top 1 is yellow and blinking the bottom is green and permanently on

Has been scrambled by a power spike, so if the LED's Activity Lights on the Network Port are on try unplugging the Modem for about 10 seconds and then plugging it back in.

It may also pay to unplug the Desktop computer and press the Power On Button on the front for 10 seconds as well and then plug it back in and see if that makes a difference.

Okay done the above and everything is still the same

As for the Drivers you need the Make & Model of the Computer so if it's a HP Something you need that

Its a Packard Bell but how would I find out the model? Do I need to open up my computer or is there some file that would tell me what model it is, if so where do I need to look to find it

Im sorry if im asking really basic stupid questions and thanks for the help already offered

Stuart

by rapzkilla

If it is HP, then on the front it will say HP something. example HP pavilion d6000 or if its dell it be Dell DX6000. Now sometimes the manufacturer name will be on the front and model will be on the side. will look like this e.g DX9000, or DV3000 etc.. You should have also received a driver CD with your computer on purchase. I will help you more if i know your manufacturer and make

Gabriel
http://www.techhelp.ca

Good luck. Let me know

by tnyamutenha

Hie,
From the infomation you have provided above, it looks like you have networkadapter problem( you cant even see it in your network places)

go to your device manager and cherck whether your driver is installed,( find ourout if there is any yellow exclamation mark) iF there is one then you need to download the driver.

by oldbaritone

Delete the device in the Hardware Manager, and it will reinstall itself when you reboot the system.

You may also want to check BIOS setup to be sure the device hasn't been disabled.

by gclifton_banned1234567891

You didn't say if you were on a home network or if the PC is connected directly to the modem. Is your laptop connected to your modem through a wireless router? Info would be helpful. I have seen instances where someone had inadvertenly turned off the network switch on the modem. My cable modem has 4 lights (2 on steady and 2 flashing) and a button that allows me to turn off the modems network connection. I have a small network at home and all run through a 4 port wireless access point. The again it just may be your NIC card or cabling.

by daveaaa3

The reason I asked for you to check the status LEDs on the back of the computer was to verify basic network connectivity. It sounds like you do, but there is more to having a computer talk on the network than this. Is there a router involved here like someone mentioned above? What is your computer connected to, a router or directly to the modem?

by godhatesme

Okay I have now found out I have a Packard bell: Imedia x2415

I have been to the Packard bell website to try and find the driver download but as my Pc was brought in 2008 it is no longer listed, I then found they had a older version section which is listed by the model/year

This is the first link I used

http://www.packardbell.co.uk/pb/en/GB/content/download

Below is the 2nd link I used, if it doesn't work you can go through the first link and the link to the older versions are near the top right hand corner of the page

ftp://ftp.download.packardbell.com/DESKTOP/

This is the details of the router/modem I use

http://kbserver.netgear.com/datasheets/dg834gv5_ds_29apr08.pdf

Now for the Device Manager part

Under the Network Adapters there are yellow marks against all of the parts connected

6TO4 Adapter
6TO4 Adapter
Microsoft 6to4 adapter #16
Microsoft 6to4 adapter#3
Microsoft 6to4 adapter#7

by daveaaa3

You network card may not support something named IPv6 which is what 6to4 is involved with. When you are in Device Manager did you see your hardware network card? This is a Realtek RTL8101 according to some internet searches.

by oh smeg

nvidia_ethernet_6762.exe

It is the network Driver listed here

ftp://ftp.download.packardbell.com/DESKTOP/iMax%20(2008-2009)/Driver%20Vista/

Col

by godhatesme

Day 2 of the no network challenge :-)

It was suggested to try this..........

*** Delete the device in the Hardware Manager, and it will reinstall itself when you reboot the system.

You may also want to check BIOS setup to be sure the device hasn't been disabled ****

This didn't work and after un installing/rebooting there was nothing remaining in my Device Manager so I did a roll back to a week earlier and managed to get the network adaptors to show again (although they were different numbered adaptors with problems) i also checked the BIOS set up

***You network card may not support something named IPv6 which is what 6to4 is involved with. When you are in Device Manager did you see your hardware network card? This is a Realtek RTL8101 according to some internet searches***

The only mention of 'Network' in the Device Manager is

'Network Adapters

6TO4 Adapter
6TO4 Adapter
6TO4 Adapter
Microsoft 6to4 adapter#3
Microsoft 6to4 adapter#7

and the only mention of Realtek is under my Sound, Video, and Game Controllers

***nvidia_ethernet_6762.exe

It is the network Driver listed here

ftp://ftp.download.packardbell.com/DESKTOP/iMax%20(2008-2009)/Driver%20Vista/ ***

I also tried the above but after looking I thinks its because its for a Imax and I have a Imedia (if that makes a difference)

I am going to run a boot time scan with my avast software and see if that bring anything (maybe I should of done that first)??

Thanks for the continued help and support and also all the different ideas to get this sorted, if you guys have any other suggesting im ready and waiting to give it a try :-)

Stuart

by daveaaa3

Hardware not showing in Device Manager and definitely not working. Just for fun, open Device Manager again and from the menu click View, Show Hidden Devices and expand the Network Adapter key. I bet you will see the missing adapter there, but it will be grayed out. At this point, it would be better to replace the network card. They are cheap and easy to install.

by oldbaritone

Get a cheap NIC, or swap with a known-good NIC from another machine.

Most IT-types will have some old, slow NICs in their boneyard. (Tulip, anyone?)

by mindspiel

If you are so low on PC knowledge, buy usb wireless and connect over that.
Problem solved.
Period.

by godhatesme

Day 3 of the battle of the Dead Network Card

Now as it was mentioned it was fairly easy plus a little research with online videos i thought i would have a go at getting a network card and installing it myself as if i always take the easy way out i will learn nothing

I went to my local computer store and informed the guy of the Pc i have and he suggested i take this.....

http://www.maplin.co.uk/10-100mbps-pci-ethernet-card-221376

I took the little bugger home and after a battle of around 30 minutes just trying to remove the panel at the back of the Pc case (I missed a screw) i managed to install the card

I crossed my fingers (and hid from fear of explosions) as i fired up my baby, things went exactly how i expected........nothing happened, the pc didn't recognise any new software or ask for the drivers Cd that i had ready and waiting :(

After a little research i saw that i had to go under the BOIS and disable the in board network card that is built into the motherboard

Wahoo!! i thought I must of finally cracked it, i turned on the pc again and there was still nothing :(

Now i bet your all thinking... did he put the card in the right slot? or evolution is supposed to go forwards not backwards! well i had 4 options at the back of the Pc for the Network card, the first was red and too big, the 2nd was grey and too small and the 3rd/4th were grey and the same size and fitted in both, i tried both and still got the same, the Pc didn't even pick up any new hardware, I also checked the device manager and there is still nothing for networks

I dont want to give in and take the easy way out or pay for someone to fix it as I would like to learn (even if it is the hard/more expensive way)

Anyone got a plan H?

Stuart :-)

by slomover

1 remove the new card.
2 boot up and go to device manager and uninstall again what ever you have installed for your old or new NIC. (Plug your Cat 5 patch cable into the On-Board NIC connection)
3 Re-boot (Cold/Hard Boot) go to BIOS and enable the on board NIC, continue to Windows. While booting check the activity lights on the MoBo to see if they flicker during boot. (without drivers the NIC should flash momentarily while BIOS does the POST) you may miss seeing it so continue.
4. Vista (in bottom right of screen) will say installing devise drivers, if it sees it. (your drivers are not gone they are still on your hard drive and Vista will go there to use them to re-install) Then it should tell you that the drivers were installed and your ready for use. If it does not there are 2 possibilities. the first is the on board NIC is "Toast" the second one is the on board controller is "Toast" if it is the NIC we will go back to the new card. If it is the Controller you need a new motherboard.
5 just to make sure go to devise manager again to check if there is a Network adapter showing.
6 earlier you said that you found your drivers on the internet if so un-zip the file in a location that you remember. then go to that location and look for the setup.exe file and click on it, it will start an install wizard, the wizard will search for your NIC if it finds it it will install the drivers. If the wizard cant find the NIC it will say no devise found (maybe) if it installs go to device manager and check again if it is now listed and still doesn't work the NIC id "Toast"
6 While your computer is still on, go to the laptop and check the network see if the laptop sees your computer in the network, if you see your computer on the network but you cant get out on the desktop your on board NIC is "shot"
7 Shut down the desktop and go to the support center of your computer maker and look at downloads, find the manual for your desktop, open it up (usually a PDF file) and page through until you find the explanation of your motherboard layout, it will tell you what all of your slots are, PCI, PCI x1 or PCI-E, then look at the box of the new NIC and see what form factor it is probably PCI and then install it in one of the correct slots,
8 (Plug your cat5 cable back in before you start the computer again) Go back into BIOS and dis-able the on-board NIC again. make sure that you save and exit. and then continue to boot Vista,
9 Of course we are looking for the OS to tell us that it found new hardware (again bottom right of screen) if nothing happens go to
10 Put the drivers disk that came with the new NIC in the DVD and search through the files until you find the drivers, go in and click on the setup.exe file again, a wizard will start it will install the drivers or tell you no such device found if it doesn't find the new card then the on-board controller is gone and you need to start looking for a new motherboard, ... but lets continue, if the install completes lets go looking in devise manager and make sure. If the new NIC shows and it still doesn't work you know for sure that the controller is gone. If available take the new NIC out and install it in a different machine to make sure it wasn't bad to start with. if it works in a different machine your on board controller is dead = new MoBo. Earlier another poster suggested using a wireless adapter and that may just work as it is handled by the USB manager, you can find them at most computer stores cheap 8-15 dollars I always keep one on hand for just such an occasion, of course you need a wireless router for it to work if you don't have one then buying that plus an adapter plus the new NIC you already bought is going to be as expensive as buying a new MoBo.
Hope this helped Good Luck

by Member 26331835

Hello Stuart, i am IBM certified tech support. Recently i had two customers with same symtoms and in some cases is virus undetectable. I removed and reinstalled adapters but the network devices were not working or were alerted in the system devices. New USB adapters can work but the virus remain in the operating system. If you tried to install a new network adapter and it does not work, i recommend you backup your documents and choose one of these procesures:
a) Visit your computer tech support and explain this case. For time-money is better reinstall your Windows.
b) Try to clean at your risk. Follow this steps:
run CCleaner
next run your antivirus for all disks, files and compressed
next run Malwarebytes??? Anti-Malware
next run ATF Cleaner- this clean the browsers files
next run WinSockFix- this repair your network connection
next run MSNcleaner
next run Advanced SystemCare
next run Argente - this is a registry cleaner
and Panda Active Scan.
if it does not work, let me know
Greetings

This discussion is closed to new replies.