NAT setup

I need to set up NAT on a Cisco 2621. I have a number of workstations on subnet 192.168.0.0/24 that need to pass DNS requests to subnet 161.228.27.0/23

I configured interface FastEthernet 0/0 as the inside interface with ip address 192.168.0.98/24. FastEthernet 0/1 is configured as the outside interface 161.228.27.244/23.

I can ping the DNS server from the router but from none of the machines on the 192.168.0.0/24 network.

From here I’m stumped. The Cisco site has helped but my lackof experience with IOS is glaring.

Any help with specific commands or links to such would be appreciated.

Rob