PIX version 6.2
I need to allow the following ports:
TCP 1720
TCP & UDP 3230-3237
From 130.63.63.11 and 130.63.63.115 to an internal host with an address of 192.168.1.150. External/Public pix interface for the sake of this example is 50.50.50.50. So far I have
access-list video_in permit tcp host 130.63.63.11 host 50.50.50.50 eq 1720
access-list video_in permit tcp host 130.63.63.115 host 50.50.50.50 eq 1720
access-list video_in permit tcp host 130.63.63.11 host 50.50.50.50 range 3230 3237
access-list video_in permit tcp host 130.63.63.115 host 50.50.50.50 range 3230 3237
access-list video_in permit udp host 130.63.63.11 host 50.50.50.50 range 3230 3237
access-list video_in permit udp host 130.63.63.115 host 50.50.50.50 range 3230 3237
access-group video_in in interface outside
From what I’ve read this should allow the proper port ranges in. Assuming the above configuration is correct, I believe I need a static command to forward external port specific traffic but I can’t seem to get the command correct. Can anyone shed some light on this matter for me?