11 replies
by lakeffect Accepted solution
by lang.georgw Accepted solution
I don't want to get your hopes up because I do not have a solution; but I've used EVDO web access from my Audiovox PPC6700 to access the internet and wanted to know the same thing you are searching for. You actually got firther than me w/ your use of a NIC for a gateway.
Good Luck!
.....gw
by lustylipstick Accepted solution
edited by moderator
Message was edited by: beth.blakely@...
by johnsnow Accepted solution
edited by moderator
Message was edited by: beth.blakely@...
by johnmcevoy Accepted solution
edited by moderator
Message was edited by: beth.blakely@...
by juan78729 Accepted solution
by juan78729 Accepted solution
Simple actually....disable DHCP on router and enable ICS on internet system. Now I can plug in the router to the A/C converter
adapter in my truck and have two notebooks with internet access in the car.
Router config:
1. Reset Linksys WRT54GS
2. Left all default settings including WAN port since it is not used
4. Only change was to disable DHCP
EVDO on notebook config:
1. Ensure you EVDO connection works
2. Via Network Connections manager, right-click on Broadband connection to select Internet Connection Sharing
4. Right-click on LAN connection to view Properies. TCP/IP settings should be set to static with 192.168.0.1 subnet mask 255.255.255.0 and no gateway
Physical connections:
1. Connect EVDO system to any switch ports 1 through 4...do not connect to WAN port
Enable wireless security:
1. On available system, set static IP to 192.168.1.2 subnet mask 255.255.255.0 (no gateway)
2. Open browser and type 192.168.1.1
3. enable WPA-PSK with TKIP or any preferred encryption method
4. Change temp static IP back to dynamic IP settings
Good luck....
by kanirip Accepted solution
Hi,
I tried the solution given by juan8769 but is not working. i have set up the router as stated i.e. disable my router as a dhcp server.( or was the instruction to disable the 'Get Address Automatically from ISP' option?)
I have also set my IP address of my Internet supplying machine to 192.168.1.0. and also the parasite machine but I'm still not able to browse the internet with the parasite machine.
The only point of note (part from d fact this ain't working of course!) is that if I try to set up the parasite machine with the same IP as the host, windows complains and says that there is another machine on the network with the same IP.
But funnily enough I can't ping my host machine from the parasite and vice versa.
Please What could I be doing wrong?
URGENT!
I'm using a netgear router(Can't remember the particular version).
by lakeffect Accepted solution
by ebarb Accepted solution
by kevin.boer Accepted solution
I know I'm a bit late to the party, but thanks for this guide on sharing my EVDO connection!
One possible correction ...
You mentioned:
1. Connect EVDO system to any switch ports 1 through 4...do not connect to WAN port
In my case, that didn't work. What _did_ work was to connect to the WAN port.
There may be some other setting on my machine that made that happen, but if somebody else comes across this article and has trouble, try the above.
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending