5 replies
by dave.osborne
If you can get to the "device" i.e. if it is a computer's nic, then on that computer, start->run->cmd and type "ipconfig /all "... it should display both the MAC and IP
If you can't get to the device, then on the server which it is connected to,try start->run->cmd and type "arp -a" ... look down the tabel to find your MAC and then the corresponding IP
Let me know if this helps ... if neither does, you cuold always try to download a program that will look up MACs on your network and giveyou IPs ... try www.download.com and type in "MAC IP"
by joseph moore
Tim:
Yes I agree, looking at the ARP cache on your machines is a good way of finding the IP you are looking for. Just remember, you have to look on machines that have connected to this rogue machine in a relatively short amount of time (I think 12 hours is the default purging of ARP entries).
If you can check your switches/routers, they will also contain this info. That might be a better place to start.
But, if you need a server/workstation option (if you can't check the switch/router), then you can also try GETMAC.EXE from the Windows resource kit. That tool works against remote machines, and gives you all MAC addresses for them.
GETMAC \\REMOTEMACHINE
You could do a NET VIEW in your domain, pipe those results to a txt file, then open the file, add GETMAC in front of each machine name, save the file as a .BAT, then run that file, and save those results to a 2nd txt file.
Then just check this GETMAC results file for the MAC you need.
hope this helps
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending