Networks

Ask something
Discussion Locked

netware 5x and arcserve 7

0 helpful
9 replies

by pohbearcynthia 1 view

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
After re-installing Arcserve7, on a netware 5x server with sp4, the arcserve.nlm will not load. At the server console, I get an error E0125. The sys: is at 24% capacity, and the Vol1: is at 8% capacity. Does any one have any idea how to solve this problem. (beside re-loading netware 5x.

9 replies

by alpha-male

CA says this is a memory related error...though that's not what it looks like.

I think my first step would be to check the configuration of Arcserve. Then, make sure Arcserve is patched to the newest level. If you still have difficulties, my nextstep would be to apply the latest SPs to the Netware server.

Take a look here for information and troubleshooting help:

http://support.ca.com/asnw7supp.html

Good luck!

by highlander718

1, unload arcserve, 2 unload nwaspi 3, unload cpqscsi,
power off the tape drive 2 to 5 min, power on the tape drive, load nwaspi,
load cpqsci, then load arcserve

by bpriar

You may also want to try running setupnls from the system console. Arcserve inserts objects into the NDS tree and I've seen it have trouble loading the schema hasn't been extended. Once you extend the schema, try loading Arcserve again.

This discussion is closed to new replies.