The clients on my Netware 6.5 network cannot see the tree. I can connect to the server by specifying the IP address but cannot browse, or see, the tree.
The following are the results from: slpinfo /all
*****************************************************
*** Novell Client for Windows NT ***
*** Service Location Diagnostics ***
*****************************************************
SLP Version: 4.91.0.0
SLP Start Time: 11:23:25am 6/6/2007
Last I/O: 11:02:00am 6/7/2007
Total Packets: Out: 1960 In: 4
Total Bytes: Out: 91014 In: 984
SLP Operational Parameters Values
——————————- ————
Static Scopes NO
Static Directory Agents NO
Active Discovery YES
Use Broadcast for SLP Multicast NO
Use DHCP for SLP YES
SLP Maximum Transmission Unit 1400 bytes
SLP Multicast Radius 2 hops
SLP Timers Values
————————————- ————
Give Up on Requests to SAs 5 seconds
Close Idle TCP Connections 5 minutes
Cache SLP Replies 5 minutes
SLP Default Registration Lifetime 10800 seconds
Wait Before Giving Up on DA 5 seconds
Wait Before Registering on Passive DA 1-2 seconds
Scope List Source(s)
—————————————- ————
DA IP Address Source(s) State Version Local Interface Scope(s)
————— ——— —– ——- ————— —————
Local Interface 10.0.0.7
———————————
Operational State: UP
Operating Mode(s): MCAST
SA/UA Scopes:
Last I/O: 11:02:00am 6/7/2007
Total Packets: Out: 146 In: 4
Total Bytes: Out: 10066 In: 984
Last Addr Out: 224.0.1.22
Last Addr In: 10.0.0.1
Local Interface 192.168.0.6
———————————
Operational State: UP
Operating Mode(s): MCAST
SA/UA Scopes:
Last I/O: 11:41:13pm 6/6/2007
Total Packets: Out: 1814 In:
Total Bytes: Out: 80948 In:
Last Addr Out: 10.0.0.1
Last Addr In: 0.0.0.0
Thanks for your time.