Discussion Locked

Network Accessibility

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Two computers on my network cannot access nor be accessed by other computers on my network. I have checked and cross-checked. All settings are okay. Everything seems to be working fine. What do I do?

9 replies

by kent.manley

Troubleshoot from the physical layer working up.

Sorry for the short answer; you've left no clues about product, configuration, or anything else. And that's a ten-point answer.

Good luck.

Kent

by nyanebae

I am running NT server with win 95, 98, NT and 2000 workstations. I can ping other machines on the network from these machines but they cannot see any other machine, nor can they be seen in Networkneighbourhood.

by kent.manley

Then your problem is likely to be in the workgroup/domain configuration. Make sure that these match between workstations and your domain.

Ping is a TCP/IP level utility. Open a command prompt and try

nbtstat -a nameofothercomputer

-and-
net view

from the malfunctioning system to see whether you can get to the browse list from it. As I mentioned above, the problem most likely is in the workgroup/domain name configuration, or if you have a WINS server, make sure your configuration pointing to it is correct.

Good Luck.

Kent

by william jay

On the "invisible" machines - enable print and file sharing, reboot, share some directory or other, wait up to fifteen minutes for the NT server to list the resources to everyone else, (depends on browse master settngs), and there you will be in thenetwork neighbourhood ...

ps. You can ping because tcp-ip is installed, you can browse the microsoft windows network when NetBT is installed properly ...

This discussion is closed to new replies.