HI ALL !!!
Could you help me ? I had a IBM 10/100 Etherjet cardbus Adapter, I try to make a network bootdisk for my IBM ThinkPad I series 1400. When i try to boot, i had this error :
a card was not detected in the selected slot !!
PROTOCOL.INI :
[network.setup]
version=0x3110
netcard=ibm$,1,IBM$,1
transport=ms$ndishlp,MS$NDISHLP
transport=ms$nwlink,MS$NWLINK
lana0=ibm$,1,ms$nwlink
lana1=ibm$,1,ms$ndishlp
[IBM$]
DRIVERNAME=IBM$
MEMORY=AUTO
IOADDRESS=AUTO
IRQ=AUTO
SOCKET=1
MODE=MEM
NOCHECK=NOT PRESENT
NOLED=NOT PRESENT
TXBUFFERSIZE=2
RXBUFFERSIZE=15
ERT=HIGH
NOEARLYRX=NOT PRESENT
NOEARLYTX=NOT PRESENT
LINESPEED=10
LINEMODE=FULL
LINKDISABLE=NOT PRESENT
NOBURST=NOT PRESENT
LATENCY=32
CACHE=32
NOWRITEPOST=NOT PRESENT
NOPREFETCH=NOT PRESENT
VERBOSE=NOT PRESENT
[protman]
drivername=PROTMAN$
PRIORITY=MS$NDISHLP
[MS$NDISHLP]
drivername=ndishlp$
BINDINGS=ibm$
[ms$nwlink]
drivername=nwlink$
FRAME=Ethernet_802.2
BINDINGS=ibm$
LANABASE=0
SYSTEM.INI :
[network]
filesharing=no
printsharing=no
autologon=yes
computername=ROBOT
lanroot=A NET
username=robot
workgroup=ITA_SH_PROFS
reconnect=no
dospophotkey=N
lmlogon=0
logondomain=ITA_SH_PROFS
preferredredir=full
autostart=full
maxconnections=8
[network drivers]
netcard=ibmcndis.exe
transport=ndishlp.sys
devdir=A NET
LoadRMDrivers=yes
[Password Lists]
*Shares=a net\Share000.PWL
CONFIG.SYS :
files=30
device=a net\ifshlp.sys
DEVICE=a net\HIMEM.SYS
DEVICE=a net\EMM386.EXE NOEMS X=C000-EF00
lastdrive=z
========================
AUTOEXEC.BAT :path=a net
a net\net initialize
a net\nwlink
a net\net start
net use z: \\ITA_SH02\Clients
echo Installation en cours…
z msclient\netsetup\install.exe /$
Thank