Discussion Locked

Networking Connectivity

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Ok...Here we go...

XP Pro connecting to XP Home. ip settings are 192.168.1.2 and 192.168.1.3 respectively with subnet masks of 255.255.255.0. Using a cross over cable from one nic to the other. The folder from the one computer is shared to everyone on the network. Both assigned to the workgroup "MSHOME".

Why can they not see each other???

Am I missing something?

8 replies

by sats18

# See that hav u installed the the NetBUI protocol
from the Network propeties.If not from the Network properties add it.

# try pinging each system.
# Again from the Network properties enable the box, I want to share my folders and printers.

Restart. It should work. good luck.

by Member 33712138

Is XP's firewall 'protecing' you from each other?

Check out the stats on the network. If the cards are sending or recieving anything then the problem is not the cards or the cable and is most likely a protocol error.

by Member 33712138

Is file & printer sharing install on both of them?

You will probably also have to use client for microsoft networks as well to login to the machines from the other one.

This discussion is closed to new replies.