Question Locked

New Hard drives for HP Proliant ML570 server

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I bought two new 72GB hard drives for my HP Proliant ML570. After mounting them, I expected them to be detected, but to no avail. What is the procedure to have them detected and used. My platform is Windows 2003 Server.

5 replies

by oh smeg

And have a Unique SCSI Address all that is required is to Open the Drive Management and select the Drive and chose the Prepare Option that should pop up as soon as the drive is Highlighted. However if that doesn't happen Right Click on one drive at a Time and in the drop Down Menu select the Format Option.

You'll need to format the second drive after you finish formatting the first one. ;)

Col

by bratlou

Thanx for the reply, but the thing is, There is nothing that shows that the new disks are connected, no "On Light" on the outside, even going to disk management, they don't appear. So the above suggestion doesn't seem to address my issue altogether.

by oh smeg

Every SCSI HDD has a row of Header Pins that you need to set a Unique SCSI Address with. This is generally between 1 and 7 but can go up to 14 or 15 for the better SCSI Controllers.

You need to set each Drive to a Unique Number which is not already in use. So if the existing drives have a SCSI Address of 2 & 3 and you want to add another 2 SCSI Drives to this same SCSI Channel you need to set the new drives to 4 & 5 or something else that isn't already in use.

To find out the used SCSI Addresses you'll need to open the SCSI Setup and see what is currently being used and then adjust accordingly. ;)

Col

by bratlou

Yeah I will work on that and give you feedback.

This discussion is closed to new replies.