Discussion Locked

Novell Client 3.3 and First Print Job

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I was wondering if any one else was experciencing this problem and had any ideas on what to troubleshoot. Our company recently upgraded all of our WIN98SE clients to Novell Client 3.3. The Netware Server verison is NW5 SP1. The clients were previously on Client 3.2. Since the upgrade a number of users are experceining problems during there first print job of the day. It will take anywhere from 2 to 5 minutes to print anything.
I was wondering if maybe the client someone was trying to figure to use TCP/IP or IPX to print or if it was trying to authenicate to the printer. Any ideas? Thanks to anyone who helps.

7 replies

by rmacbeth

Mike, a few ideas, The changes to ip or ipx came with ver 2.5 with the client perfering ip so I don't think that is the cause. You would have seen login problems first. The main concern that I have is that you are at SP1. There have been a number of fixes to printing and tranport issues with the later service packs. The current one is NW50SP6A this service pack was tested with ver 3.3 of the client. it is very large sp so I might what to order the CD or have a good bandwidth to download it.hope that this helps.
Rich CDE/CNE/CNI/CCNP

by rmacbeth

Mike, SP2 should help you. I not going to put you down for not knowing Novell.. but one thing when you do you will find it a lot better OS. When you get your patch install let me know and we can go on from there.
take care
Rich

by michelle_lovejoy

As you can I do not know much about Netware, I am a NT person (don't cringe!). We are running Netware 5.1 SP1 with Plans to upgrade to SP2a soon.

by jackie d.t.

Hi Michelle,

The Support Pack 2A has updated files for NDPS, if you are using NDPS this may help. But it is unclear if you are using the older style NetWare printing (non-NDPS w queues) or NDPS printing. What type of NetWare Printing are you doing? If you are using NDPS printing, what type of printers do you have and what printer gateway are you using (ex: Novell, HP, Lexmark)?

This discussion is closed to new replies.