Discussion Locked

NT Printing

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

The NT 4.0 server will not allow print jobs to go through on local ports LPT1. LPT2 will allow print jobs. After logging into the server the clients cannot print to their local LPT1 ports even with the network cable removed! This doesn?t happen with the 98 or 95 machines.
When a print job is sent it goes into the queue... disappears but no output on the printer. While the server is rebooting the print jobs that were sent earlier are sent to the printer but when the OS is fully loaded no more print jobs can be sent.
The printer cables and the printer has been checked and ruled out and seeming the problem happens with other NT workstations the LTP 1 port on the sever has been ruled out as well.
I think it might be a permissions problem but I have no idea of which one. Two days prior some user accounts were deleted from the server but no admin accounts were touched.

6 replies

by inthemix88

Hello all,
Is the printer share still existing ? If so, are the permissions set so that users can submit jobs to it ? Are you mapping the LPTx ports thru the login script ? If you log on to a NT workstation with Admin, does the printing work to LPT1 ? Are you using printer variables at the workstation ? If so, make sure that the enviroment value is accurate and that the printer share exists.
Get back to me,
Martin Reyes
Sr Netword Administrator
LHRIC

This discussion is closed to new replies.