Ok, here we go. I have a T1 line that is supposed to connect my LAN at my datacenter to my LAN here at the office. I have at the data center IP addreaa range of 10.2.0.1-255 here at the office it is a 10.0.0.1-255 network.
on each end is a cisco 1721 set.
router datacenter is configured as:
serial0:
ip address 10.1.0.1 255.255.255.0
router eigrp 1
network 10.0.0.0
auto-summary
!
fastethernet0
ip address 10.2.0.1 255.255.255.0
speed auto
half-duplex
no cdp enab
OK router main office is configured as:
serial0
ip address 10.1.0.2 255.255.255.0
router eigrp 1
network 10.0.0.0
auto-summary
fastethernet0
ip address 10.0.0.2 255.255.255.0
speed auto
this is what I have so far, but I am unable to see the computers from one end to another.
Thanks,
jeff,
if you have more questions or want to contact me by email jgard@mcstrategies.com or call me at 1 800 999 6274 ask for jeff.
I’ll give unlimited points to whoever helps me get this thing going where I can send data from a machine here to one at the datacenter.
unfortunately I can only give 350, and if I ever get more i’ll give them to you too.