Question Locked

OSPF Router

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Int s0=198.17.16.10/24, Int lo 100= 1.1.1.1/24, int lo 10=200.200.200.200/24 , int S1=210.210.210.210/24. Which of the above addresses will be chosen as OSPF router.
Int s0=198.17.16.10/24
Int lo 100= 1.1.1.1/24,
Int lo 10=200.200.200.200/24
Int S1 =210.210.210.210/24
None of the above.

I want to say none

2 replies

by michael kassner

In OSPF it is the highest IP address on a router, and can be set large by configuring an address on a loopback interface of the chosen router.

This discussion is closed to new replies.