What are the commands to setup an VPN tunnel with the following constraints. I have been trying to do this through the gui interface and have not been successful. I also cannot ping outside my PIX501. It connects to the internet and is able to ping inside the internal network. Here are my constraints –
Remote endpoint is: 66.179.80.108
Remote internal network is: 192.168.50.0 (255.255.255.0)
Internal network will need to make ACL from 172.28.43.8 to host 192.168.50.83 and 192.168.50.86
Internal network will need to NAT interesting traffic to 172.28.43.0 255.255.255.0
Internal network end point is:66.137.84.121
Internal network: 192.168.10.0
Phase 1
Authentication: Pre-Shared
Encryption: 3DES
Hash: SHA
DH: 1
Lifetime: 86400 sec
Phase2
ESP encryption 3DES
ESP authentication SHA 1
Lifetime 28800
No PFS
Please help.