I am setting up a point-to-point over a full T1 line between 2 offices I can communicate via the serial interfaces between the 2 routers. From the host router I can ping the Remote Ethernet side of the remote router and PC’s on the remote network. I cannot ping the server or other PC’s on the host network from the remote router or remote PC’s. All the interfaces and line protocols are showing as up. I can ping the ethernet side of both routers and I can ping each router from it’s respective network and vice versa. Below are the router configs. Any help would be greatly appreciated. Thanks.
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Host
!
no logging console
enable secret 5 ***************************
enable password *********
!
ip subnet-zero
!
!
!
!
!
!
!
interface FastEthernet0
ip address 192.168.100.1 255.255.255.0
speed auto
full-duplex
!
interface Serial0
ip address 192.168.1.1 255.255.255.0
encapsulation ppp
no fair-queue
!
ip classless
ip route 192.168.101 255.255.255.0 192.168.1.2
ip http server
!
!
line con 0
line aux 0
line vty 0 4
password **********
login
!
no scheduler allocate
!
end
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Remote
!
no logging console
enable secret 5 *********************
enable password ******
!
ip subnet-zero
!
!
!
!
!
!
!
interface FastEthernet0
ip address 192.168.101.1 255.255.255.0
speed auto
full-duplex
!
interface Serial0
ip address 192.168.1.2 255.255.255.0
encapsulation ppp
no fair-queue
!
!
ip classless
ip route 192.168.100.0 255.255.255.0 192.168.1.1
ip http server
!
!
line con 0
line aux 0
line vty 0 4
password ********
login
!
no scheduler allocate
!
end