Question Locked

Printing via Remote Desktop on Windows 2000

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Our company runs all computers as well as our server on Windows 2000. For some reason, we cannot access local printers installed on the client unless it is also installed directly on the server that we are connecting to. We have the "printer" box clicked under local resources, yet our local printers do not show up in remote desktop unless, like I said, we install the driver direclty onto the server.

So that is my first question. Does anyone know what the problem could be?

Also, we just purchased a new printer for use with one of our off site computers. Our network admin is saying that they need to install the driver onto the server, and we therefore need to ship them both the driver disk AND the printer itself. Apparently, she cannot install the driver onto the server without the printer being present.

Is there anyway around this? Obviously, if the first question is solved, then the second is moot.

Thanks for your help.

11 replies

by 1bn0

Yes. The printer driver HAS to be installed at the server.

The application is runnning on the server. The application prints to the local print driver. The print job gets redirected to the client print queue by terminal services.

You shoould not HAVE to have the printer at the server to install drivers.

Of course you can't be sure about all printers.

I was running this kind of setup at my last postion. Had Server in Ontario and clients in Florida, Alberta and Toronto. Spent half my time on the system installing print drivers as everybody get buying new printers that they just HAD to have.

by nancie1186

Hi.

It is correct that the driver be installed on the server.

Whilst installing a usb printer at another location, I was prompted that the printed was not connected even after installing the driver. This is where I believe your IT Dept is asking to ship the printer.

What I was able to do was download the installation file in a zip format, extract but not install the software (as it was the only dl), copied the necessary files to the system and installed them thru add printers, selecting browse and select your print driver.

Hope this Helps!

by fwang

Local printer can be used remotely only when you share it.

Start->Printer and Faxes
select local printer->Properties->Share:
Share this printer, give a Share name, then you should be able to see this printer from the network. Double click it from other Win2k or server will install the printer.

by xt john

need to be installed on the server, but an identical driver needs to be installed, PS, PCL6, for NT,2000,Xp or 2003, etc. Also, if you are getting blank pages on the client side, try a different driver on both sides. We just had a huge problem at a site trying to use PS drivers. We set up TS printing using PCL6, no more blank sheets. As far as installing drivers for the new fangled USB printers and such, that seem to only insatll when connected directly to the computer... We have set up numerous models like this. Weve never had to have the printer at our site to set up drivers. The most we ever needed was the install disk, if we couldn't download it. In the case of HP drivers, you can generally dig through the install cd to find the .inf file to install the printer manually. Open Printers and faxes, don't click on add a printer, rather click on File>server properties. Click on the drivers tab and click on add at the bottom... then next and the have disk option. Browse the disk, typically in the enu\drivers\win2k_xp folder. The recent one I added had all the files in the root directory of the install cd.

by fynos

Hi:
And then ?
I mean after you install the printer from the server properties how can I test the printer ???
Or print a page ?

by churdoo

This process only loads the driver into the appropriate location on the server. Then you have to connect to the Term Server from a client which has the particular printer installed locally, and verify that the printer appears on the session's printers folder and that you can print to it.

For client-side USB printers and IP printers, i.e. printers using non-legacy device names (USB001 or IP_xxxx, instead of COMx, LPTx, etc.), you may have to update the TSCLIENT or RDP client, as older term server or rdp clients ignore all but legacy printer port names. There is an installable client on the term servers, if you can gain access to a 2K3 server, an installable RDP client is located in c:\windows\system32\clients\tsclient

by fynos

OK
I would like to conclude!
Steps:
1. Install the printer to the server
2. Install the printer to server properties
3. At the client activate at the remote options to print
Correct?

If the server located to the US and the client GR, do I have to change the port of the printer in the server? Like (external ip/ local printer on the client)

Thank you!

by churdoo

... unnecessary.

Some people do step 1 instead of step 2, as they don't know that you can simply add the drivers to the server properties without actually installing a printer. The disadvantage to the step 1 method is that it leaves a false printer on the server and therefore can confuse the users.

So the steps are:
1. install the printer drivers to the server properties
2. At the client, activate the remote options to print (this is the default).

Ideally you should not have to do nor change anything else.

by fynos

Interesting tip!!

But if the server locate at the US the client in GR and the remote user would like to print in his printer in GR (to print something from the server). . . the steps are the same ?

This discussion is closed to new replies.