I have the new rig all assembled with the exception
of the video card (still waiting for the Gigabite RX560).
Case- http://www.minicase.net/minipc-T3-J1900T1.html
CPU – https://www.newegg.com/Product/Produ…82E1681**13410
Mama/Board – https://www.newegg.com/Product/Produ…9SIA6BM56U1172
PSU – https://www.newegg.com/Product/Produ…95&ignorebbr=1
Memory – DDR3
In the test run, I disconnected the the HHD and turned on the power. The CPU cooler fan
cycled fine, however, three other LED fans would very briefly stop (1/10 of a second) and
resume only to repeat the same cycle. This went for other a one minute period.
Not sure if this matters but the fans are 3 pins and the board system fans are 4 pin headers.
Also, the fan of the PSU, is also not spinning.
In addition, I checked the back of the mama/board and only the spacers provided
by In Win were installed.
I hope someone can be of helf, as I am a stump two legged computer builder.