I hope you can help me with this.
I created an RAID 0 Array using the Raid 133 card.
Both HDD got detected before I created the Array.
I then installed windows 2000, and used the drivers for the RAID card that
I saved on a floppy.
Windows 2000 installed OK, and I do see the RAID card installed correctly in the Device Manager.
My only problem is that I can?t boot.
It scans for a boot record in the A drive, CD Drive, and SCSI drive, and doesn?t find one.
I went into the BIOS on the RAID card, and tried setting the first HDD to BOOT. That didn?t work.
I also tried changing it to HDD0, but same thing.
The weird thing, is that if I put a bootable CD, ie. Windows 2000 CD, but I won?t start the installation, it?ll eventually
Boot normally, and I can log into my O/S. Same goes if I have a floppy in there (bootable or not).
How can I fix this problem??
Thanks,
Ronen