Question Locked

RAID 5 Windows 2003 server

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I just got a small server (HP ML 110) with 4 disks (SAS).
I installed win 2003 server in disk0 and after I booted the server and wanted to add the other 3 disks in a RAID 5 configuration that includes all 4 disks.
(hardware RAID5 is not possible since the server only supports RAID 0 & 1)
Question: can I add the 3 disks and create a RAID5 to an OS that is already running on another disk?

4 replies

by scott_heath

I do NOT recommend software based RAID solutions. Just mirror the disks or call HP back and see if you can get a RAID card that supports RAID 5.

To answer your question, I do not believe you can do anything with the OS drive. I have honestly never tried it though because everything I have has either multi-disk RAID 5 or 2 mirrored drives for the OS and uses SAN for data storage.

by emanuele.roserba

The better option is IMHO to buy an Hardware RAID enabled card. The cheaper otion as far as I know is the HP Smart Array E200 with 128MB BBWC, take note that *without* Backed Behind Write Cache the card is only RAID 0 and 1 enabled. Other options are Smart Array E500/256MB and Smart Array P400 (very expensive, costs about the same as an ML110...).

by ankit01

hey u configure raid 5 but not three disk.you configure on four hard disk

This discussion is closed to new replies.