Hi, I have been happily working on my 200GB SATA hard drive until I got this idea that it was better to RAID another one together with it for redundancy. What I did was put another one in (on channel 2) and then went into the RAID utility (pressing F9 after boot up) and
created a RAID 0 disk (yes, I know, it should have been RAID 1). When it came up and asked if I wanted to SPLIT the Data from DISK 1 across the disks, I said no (yes, stupid again) and then saved and exited. The problem is obviously all the DATA on DISK 1 has disappeared. Now this is a big issue, so I quickly went back in and deleted the RAID and set the BIOS back to single mode so it could boot off the normal disk. Problem is I can’t see the DATA anymore 🙁 Is there any GURU or EXPERT who can tell me how to retrieve the data or even better reset the MBR or what ever else is required so I can boot off the original disk again. For ref, I am using Windows XP Home, Motherboard is Gigabyte GA-8S648FX-775