Networks

Ask something
Discussion Locked

rconsole

0 helpful
3 replies

by tsi

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I can't see any IP Netware Servers when I run rconsole from a Win 2k or XP workstation on my Network, only IPX Servers.The IPX servers are 4x and the IP Servers are 5x.
Any help please?

3 replies

by jim_maclachlan

Rconsole uses IPX. Try going to Cool Solutions & downloading RconIP - it's a great tool that works just about like Rconsole, but uses IP only.

by pgm554

There are a number of ways you can do this.
The Novell ways:
In you autoexec.ncf ,there should be a line that says: Load Rconag6.nlm password 2034 16800 ,make sure that it is not remmed out with a #.If so remove the #.Then, where it says password in the load statement,change it to whatever you want.You should reboot to make sure that it loads correctly.

From there , in the public\mgmt\consoleone\1.2 directory ,there should be rconj.exe.
It will then ask you for a servers IP address or DNS.And there you have it.

Or you could use the browser based portal from Novell by typing in the 5.1 servers IP address from a browser and logging in that way.(portal.nlm must be loaded .

by oz_media

Ditch rconsole it's junk.
I use a similar but FAST toold called AdRem FREE remote console for netware. Not only does it actually work, it's the fastest console I've ever run on a Netware server.
http://www.adremsoft.com

They also have other REALLY sweet Netware monitoring tools too.

This discussion is closed to new replies.