10 replies
by mail.aakash
by izmr
by hal 9000
If the last answer doesn't work or suit your needs there is the easy alternative of putting the router on a Timer Switch that turns it off and back on again at preset times.
I know that it's a dirty solution but I think that may be your only solution to this requirement from your ISP. Here the Kambrook Digital Timers can be set to as little as 30 seconds between turn off and restarts with up to 8 of these per day that can be programed in and they have a Battery Backup to allow for a loss of mains power.
If you use this you'll need to remember just to have the router connected to the timer.
Col
by munishv
download this Telnet Scripting tool file written by Albert Yale and unzip to have tst10.exe file
http://users.telenet.be/tontonzen/gg/TST10.zip
write reboot.bat file having (1 lines):
tst10.exe /r:reboot.txt
write reboot.txt with following (having 7 line):
192.168.1.1 23
WAIT "BusyBox on localhost login:"
SEND "root\m"
WAIT "Password:"
SEND "admin\m"
WAIT "#"
SEND "kill 1\m"
Many people suggest to use "reboot\m",but I found that "kill 1\m" works fine for me. Change ip address, username and password (shown above are default as per factory setting on modem).
Have the 3 files in same directory and run command reboot.bat will reboot your modem because it log in modem via telnet and reboot the modem. You can then schedule you script with microsoft task sheduler using start > program > accessories > systemtools >scheduled task to run at required time
by nokoff
by essbebe
The link given: not available.
by essbebe
The link given: not available.
by essbebe
link available here for NT.
http://www.winsite.com/bin/Info?500000026253
check here
by essbebe
link available here for NT.
http://www.winsite.com/bin/Info?500000026253
check here
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending