5 replies
You can use a utility like Norton Ghost to backup the entire disk and restore it to a larger disk.
This will replace the disk EXACTLY as it was when it was backed up (except having more free space, obviously...)
If you install both disks in the machine at the same time, you'll be able to use the direct "disk to disk" method which wont require pesky intermediate storage.
Hope this helps,
Cheers,
Tim.
by orrickh
by brent t
Ghost is great for cloning PC drives, not so crazy about using it on my server however, by checking the drive using FDISK you will note that Ghost sticks a Non DOS partition on the drive in the very begining of the drive, not sure how Netware would like that, may be just fine but I would be careful. Here is how I would handle this...
I would setup a mirror set using the new drive, after the mirror is complete, install it as the primary then I would use a third party util like server magic to resize the partition (streching the partition could also work) on the new drive taking advantage of the additional space.
Good Luck
by orrickh
by orrickh
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending