Question Locked

reserve Server IP address on DHCP

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
If I am giving a static IP address to a server or servers should I have the IP of the server reserve in the DHCP server also.

3 replies

by kjell_andorsen

Make sure you you have all the Static IP addresses on your network OUTSIDE the DHCP scope and you should be fine. For instance say you're operating on a 10.0.0.x subnet and have 25 static IP addresses you could put all your static IP addresses in the 10.0.0.1-10.0.0.26 range and the DHCP scope to cover 10.0.0.27-10.0.0.254

by p.j.hutchison

We tend to add reserved addresses to the scope (which is outside the dynamic IP range as Kjell says). Then when you need a new IP address you can see which ones are used and which are free.

This discussion is closed to new replies.