Discussion Locked

Roaming VPN with Linksys Router

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a Linksys VPN Router acting as the gateway on my office network. I need to configure the router and a notebook so that the notebook can make a VPN connection to the router. The notebook could potentially have any IP address and it could be behind a NAT firewall. Does anyone know how this can be accomplished using the equipment I have?

9 replies

by cg it

there isn't a VPN connection to the router rather the router allows VPN pass through to the domain that you have remote user access rights. If you want to connect to the router itself, that would be remote management of the router and is configurable in the router itself by enabling the remote management feature.

SuSu knew someone that had an Austrialian Sheep Dog nick named SuSu [Suzie].

by cg it

well I retract the statement " there isn't a VPN connection to the router" as some Linksys Routers do have VPN End Point to End Point Connection capability for connecting remote domain locations together.

by cg it

but your question seems to ask is "can you connect to the router via a VPN connection" for remote administration. If so, then that is accomplished via the remote management feature of the router.

by susu

The router has a VPN concentrator built in. You can create a VPN tunnel from one router to another router. There are instructions for this in the manual and there is a whole new VPN section in the configuration interface. I need to know how to create a VPN tunnel between a router and a PC running VPN software.

by jcutshall

Setting up IPSEC VPN's can be goofy. I suggest going with PPTP. Win2000 & XP have built in ability for PPTP with excellent security. Linksys may not do PPTP, but Snapgear does. You can pick up a Snapgear SOHO vpn router for under $200. The snapgear SOHO could replace the Linksys, or sit behind it as just a VPN server.

by wroming

With the linksys I am not sure of a way to do this without a 3rd party software installed on to a central computer in the office network with it NAT'ed out to the outside world.

Also if you click on this link it has what you need to do, because you are going to have to update your firmware first on your linksys router.

http://kb.linksys.com/cgi-bin/om_isapi.dll?clientID=1088960&QuestionText=How%20do%20I%20do%20a%20VPN&SelectName1=&advquery=%5bs%5d%5bRank%2c%2050%3a%5bSum%3a%20How%20do%20I%20do%20a%20VPN%5d%5bMerge%3a%20%5bThesaurus%3a%20How%20do%20I%20do%20a%20VPN%5d%5d%5d&infobase=linksysrev.nfo&record={421}&softpage=IKW_ENU_JDocView

Hope this helps you out. Also you can go to www.linksys.com and then click on knowledge base and they have some really good articles in there on how to troubleshoot stuff.

This discussion is closed to new replies.