Question Locked

routers

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
hello friends.i am looking forth to get help from you guys out there concernning routers congiguration setup.i wish that you direct my on how to go into my routers setup.i corrently have a di524 d-link wireless broadband router conected to a dsl modem provided by ny isp.my pc then connects to the Lan port 2 of the router.i want to access the router from my standpoint.how do i call up the router setup program???please get back to me.

6 replies

by mjd420nova

Possibly you'll be able to access the router setup at http:/192.168.2.1 You could then view or print the routers manual from there.

by langlier

from the pc open up a command window (Run --> cmd)

in the command window type ipconfig. Find the default gateway. This is your routers local IP address.

type that IP into a browser window (IE should definately work and firefox might)

youll then get to the routers configuration utility. often routers will have a default login and password (I believe for DLink the login is "admin" and no pass.)

if you need futher help feel free to ask.

the default ip for most routers is 192.168.0.1

by shunehelvis

hi friend,thank you very much for your reply.i did as you directed and surely i came to my routers config setup.thanks once more.i hope you are going to take my more futher in this field as am still a young strugulling guy trying to come inside the world of networking.i also foound in the setup program that one of my client machine on my and the pc i used as my server is under the lists of DHCP.so i have 2 pc under this list.how can i remove the client pc and allow only the server.or what dose this emply.hoping to read from you.greatest regards.elvis

by langlier

You have 2 PCs that are being listed as having assigned IPs from the DHCP of your router. Do you only want the router to assign an IP to certain machines? Or do you just want the IP address for the other machine to expire? I'll certainly try to help you accomplish either. (If you only want your router to assign an IP to one machine you may want to do some research into MAC Address filtering.)

by vinitogupta

Hi,
Usually Dlink default ip is 192.168.0.1 and Linksys default ip is 192.168.1.1.
Now in your workstation go to
****start-run****
type http://192.168.0.1 when it asks for username and password (dlink default - admin and password is blank for linksys default - admin and password is admin)
Imp: Make sure ur ip is set to automatic configuration if DHCP in router is enabled
you can mail me at vinitogupta@yahoo.com for further assistance.
thanks

This discussion is closed to new replies.