2 replies
by sales Accepted solution
by garciakalicharan Accepted solution
I have the same router and I am able to access my Terminal Server using a remote desktop connection. Following these steps:
1. Access the router's administration panel by typing its ip address.
2. Enter the user name and password
3. Once you have gained access, select "Setup" from the menu.
4. Then select "Forwarding"
5. Then select the port that you will be fowarding from the "Service" dropdown menu. In this case, it will be port 3389 (unless you have changed the port).
6. Then enter the ip address of the computer that will be hosting the connection.
6. Then check the "Enable" box.
7. Then save (at the bottome of the page).
This should work. However, the assumption is that you will have access to your router from outside either through a static ip or a dynamic ip monitoring service.
Good luck.
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending