I just installed an already configured GroupWise 5.5 server from our other remote office to the main office. I had to move DNS/MX records to our DSL provider and configure IP/subnet mask on the GroupWise server. It is right next to my Netware 5.0 server and email is working but the systems are both getting the following IPXRTR errors:
RIP router configuration error detected
Node 000A0C911296C claims network address 0000001A should be 1289A093.
SAP router configuration error detected
Node 000A0C911296C (WOPCPA_GBO)claims network address 0000001A should be 1289A093
My Netware server is running the following frame types:
Ethernet 802.2
Ethernet II
My GroupWise server is running the following frame types:
Ethernet 802.2
Ethernet 802.3
Ethernet II
Ethernet SNAP
GroupWise had been installed by a contractor at the other office.
My network has to run both IP and IPX due to printer connection and a CD tower that only communicates via IPX.
Can I remove all the frame types on the email server except Eternet II. Clients all connect to email via IP.
thanks,
Rob