Discussion Locked

Setting up 15 Sites on WAN Using V-SAT T

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I want to link 15 Sites together using
1. V-SAT Technology
2. and/or Dial-up to implement the
network design.
Please I need technical details on the necessary equipment and accesories to accomplish this design. Please note that out of the 15 sites there are 4 sites with 2 sub-sites each and 1 central site with 5 sub-sites. I will appreciate any comprehensive technical detail given. You can contact me on my email alexbucho@yahoo.com please feel free to send in any sketchor diagram if ncessary as an attachment to the mail for more clarity.

Thanks

8 replies

by wcraigmiles

The two companies I talked to about this should include routers as part of the deal. If that is true, then you will have local LANs that connect to a router to get to their other segments. The fact that these other segments are across V-SAT links shouldn't matter from your perspective.

From the WAN side of the router you'll probably use serial ports. Depending on the speed across the V-SAT you should be okay with normal router ports and not need HSSI or other high speed serial interface (keep it below T1/DS1 speeds).

If you are already connecting these sites across WAN connections (WAN, DSL, Frame) you can probably leave your current network numbering in place.

by sachinshenoy

1. You have not specified if you are looing for a star or mesh topology.

2. You need not always go in for a routers, some VSAT product come with built in IP routers with ethernet port. You will have to add static routes for the sites that need to connect. These VSAT work at dialup Sat-links so the bandwidth usage is charged for only the periods that you use the link. Mind you the Satellite bandwidth is very expensive.

3. Also consider the fact that VSATs are bandwidth limited due to the cost / availability of bandwidth. Uptime is also a consideration when you use Ku band VSATs (Availability depends on the region in which the network is implemented.)

This discussion is closed to new replies.