Question Locked

Setting up an iPhone for use with Exchange and/or POP

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have just taken over IT support for a customer. They bought two iPhones the next day. I have been unable to get them to connect to the Exchange server. I have a few questions that I would appreciate help with.

1. Neither phone connects using the Exchange setup, but one connects through POP. The other gives the user name or password is incorrect. Has anyone figured this one out?
2. Is IMAP required to be turned on as a service on the server?
3. Is RPC required to be turned on as a service on the server?
4. I can connect through OWA using http://mail.domain.com. Can I use this server as the same one in the iPhone Exchange setup? It works for the POP setup.

12 replies

by nimmo

Basically you need to

1. Select Settings> Mail> Contacts> Calendars> Add Account, then Microsoft Exchange.
(you can only have one Exchange account)

2. Enter your complete email address, username, password. Enter your Exchange domain name and your user login name, separated by a backslash (\).
DOMAIN\UserName

(The newer iPhones will have a seperate field to enter the domain name so you won't need to do the domain\username)

The iPhone will try to auto discover the Exchange server and will fail because you need to enter the servers internet address.

4. Enter your Exchange server's complete address in the Server field. (ie remote.domain.com.au)

5. Choose what you want to sync (this will override any current calander settings)

And that should do it.

by zfreeman

Thanks for the reply. I have tried that. I still get an error saying that the connection to the server failed. I have tried mail.domain.com, mail.domain.com/oma, and mail.domain.com/owa.

by bizintelligence

My company has got mix of iphones and samsung phones. All of them need Exchange ActiveSync enabled (alongwith IMAP feature) to connect to exchange

So in addition to steps mentioned by "nimmo" you may need to enable
"Exchange ActiveSync" feature in Mailbox features setting on Exchange server for particular mailbox.
Also if possible try using whole email address as your username and then your logon password.
For example: example@example.com.au

Cheers !

by zfreeman

I know that ActiveSync is enabled in the mailbox feature, but I also know that IMAP is still disabled (which is by default). Also, we are not using RPC or SSL. I'll try the IMAP feature and forward port 143 first. I wasn't sure if I needed it since OWA works fine. Will let you know what happens.

by zfreeman

I started IMAP under MS Exchange Services. I forwarded port 143. I also followed the steps in MS Knowledge Base 817379, since I am not using SSL. I still get nothing. When I run the ActiveSync test from testexchangeconnectivity.com, I get an error saying that TCP port 443 is not listening or blocked. I even have port 443 forwarded in my router. But when I test it using portqry, it returns a not listening message.

by bizintelligence

It seems to be an issue with router configuration. In our case, we have destination port 443 open, and forwarding to exchange server from source port 0 to 65535.

Your OWA is working which means it is reaching port 443 (if SSL). Which is strange for iphone as it is not working? As far as I understand phones just work similar to owa if properly configured.

You should check log on router (depending on your router make and model) and check packets getting dropped.

Cheers !

by nimmo

Do you have Exchange service pack 2 installed.

by zfreeman

I have a Netopia router with ports 25 (SMTP),80 (Web), 443 (SSL), 3389 (RDC), 110 (POP3), 143 (IMAP), 6001 (Something from a MS KB), 135 (Endpoint Mapper) all forwarded (Netopia uses the term pinpoint). I included port 443, but OWA was set up to not use SSL. I can connect via POP3 without SSL but not Exchange.

by bizintelligence

http://www.talkiphone.com/forums/iphone-chat/430-connect-iphone-exchange-2003-a.html

Also, let me share my configuration:
Please note these are dummy details and nothing to do with my actual configuration.

User Details:
username:alan.savona
Phone: iphone
company: example.net.au

Exchange Server Settings:
hostname: mail.example.net.au
mailbox: alan.savona
OWA is Enabled
Exchange Active Sync is enabled (dont know if needed for iphone)
IMAP is disabled (should be enabled as recommended...hmmm)

Logon settings for iphone
server: mail.example.net.au
username:alan.savona@rutledge.com.au
password:**********

Thats it.

Cheers !

by zfreeman

I finally got the phone working...once. Exactly what the final piece was is a mystery. The problem is that the sync has stopped working, and I have an HTTP status 409 error in the event log around the same time the sync stopped working. Now, I am back to the connection to the server failed message on the phone.

This discussion is closed to new replies.