Question Locked

Setting up new server - help please

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am asking for some much needed assistance. I took over a position in our family business recently and have a lot to learn. This job was given to me because I do have quite a bit of IT experience but lack in the server area. I have been all over technet and have used google like crazy. I can not hire a consultant so I am asking for help here.

We just purchased a new server with SBS 2003 R2. We run SBS 2003 (w/o SP1) at this time. We have one Static IP set up via our ISP. We have 25 users on our network.

My question is how do I go about setting up this server without taking down the other one? I only have the one internet connection. I want to test this server with a new domain name but just not sure where to start. Any help would be appreciated.

Pete

7 replies

by sgt_shultz

If you just purchased this server you may be able to get support directly from microsoft for doing as you want. sounds like you want to migrate settings from one sbs box to another. 'upgrade' if you will. you might find the steps at support.microsoft.com
your question is pretty broad and not answerable with a 1,2,3 step by step.
call microsoft. call server mfg.
with free training like this, you do get what you pay for. get some books. get them to help you get trained on active directory.
go for it. you can always wipe the new server and start over, yes?

by recentlyme

I will see what kind of support I can get from Microsoft.

We are not wanting to migrate settings. The old server is a complete mess and we are starting from scratch (owner decision). It's just a matter of moving some shared folders and setting up the exchange mailboxes (using exmerge).

Yes, I can always wipe it and start over.

by double debo

http://www.experts-exchange.com is a great resource for help.

One thing you must know up front. Windows 2003 Small Business Server will force you to make it the first server or what use to be known as "Primary Domain Controller". Your best bet is to do all of your setup on the weekend when no one is there. That is straight from MS. So your other DC will be demoted to a regular DC. This meaning that the Master Roles (FSMO) will be changed over to the SBS.

by recentlyme

still use the PC running SBS 2003? I know SBS 2003 only allows one DC so I am not sure how this would work. We have a few older programs that I would like to avoid installing on the new server but want users to be able to map to that old system to still utilize those programs. Make sense?

by churdoo

You've stated that you want to set up the new server as a completely new AD, moving only some files from the old SBS and the contents of the exchange mailboxes. You probably also want to migrate the users local profiles of their workstations since as soon as their workstations become members of the new AD, their local workstation profiles will be reset to default.

That said, you'll have your new SBS as say newad.local, and your old SBS as oldad.local, but since TRUST relationships are DISABLED in SBS, there's no way to access both AD's simultaneously.

You can, however, utilize the old SBS server hardware. Having SBS 2003, I presume it's relatively new vintage hardware and with practical lifetime remaining; the only question is how to fit it into your new IT structure and utilize that hardware. There are ways to make the 2 Small Biz Servers to play together in the same AD, and there are peeps here that are better than I at SBS that I'll leave to respond as they see fit. For me, I think the cleanest thing to do based on the criteria you've mentioned thus far is to invest in a copy of Server 2003 to install on the older server to serve the Apps that you mentioned and utilize that server hardware.

by recentlyme

Churdoo. Anyone else have any input? I could use all the help I can get.

This discussion is closed to new replies.