Hi This is Murali
From india
I have configured NAT in Router for my office network.Its is working fine…Now i am trying to configure static NAT for my office mail server to access any from outside network.After finish the config i am able to ping the (Mapped)public ip from outside in static NAT.
But once i have checked show access-list i am not getting any hit count in ACL…
Here i am pasting the configuration below…I need any one’s help this.
access-list 101 permit ip 192.168.200.0 0.0.0.255 any
access-list 101 permit tcp any host <12.1.2.3> eq smtp
access-list 101 permit tcp any host <12.1.2.3> eq www
ip nat inside source list 101 interface FastEthernet0/1 overload
ip nat inside source static tcp 192.168.200.2 25 <12.1.2.3> 25 extendable
ip nat inside source static tcp 192.168.200.2 80 <12.1.2.3> 80 extendable
ip access-group 101 in
Extended IP access list 101
10 permit ip 192.168.200.0 0.0.0.255 any (147 matches)
20 permit tcp any host <12.1.2.3> eq smtp
30 permit tcp any host <12.1.2.3> eq www