3 replies
by hschaffner Accepted solution
by oldbaritone Accepted solution
Make sure the router/gateway allows full bidirectional communication in both directions, on both subnets .2. and .4. It sounds to me as though one gateway is allowing only some of the traffic to pass in one direction or the other, and blocking part of it.
Many (most) gateways are configured as LAN/WAN, where inbound traffic from the WAN should be tightly controlled, and mostly blocked.
Make sure your gateways are configured as true peer-to-peer networks, not LAN/WAN.
by cg it Accepted solution
sounds like a routing and/or addressing problem. remote hosts requesting access to resources need a local address to find the resources or require a router which knows how to route the traffic between subnets [similar to intervlan routing].
Since you can map one way, but not the other, sounds like the router knows only 1 route.
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending