5 replies
by ckilday
Chris,
I've used wordpad and hyperterminal without any major problems. Sometimes, if I'm copying a long configuration, I run into what I would say is a speed problem...it's like my pc is downloading too fast for the console port to handle it, but there's no flow control established. The config command syntax gets mangled and when I review the running config, it stops at the last good command. When that happens, I break up my copying into smaller chunks and everything works fine. Just out of curiosity, are you removing the exclamation points between sections and removing the extra spaces from in front of an interface's subsidiary commands? It's possible the formatting cisco software uses to display the config could be causing you problems if you try to paste it back in. Hope this helps. Best wishes,
ck
by chrismorris
by jmorris
I would recommend 2 solutions.
1. Setup a TFTP server on your machine...if you have the file locally you can copy from your tftp server to the running or startup config on your router, with network connectivity. Th TFTP server software is a free download from cisco.com.
2. I've used Windows 2000 command prompt telnet for a few years when connecting to my routers. The great thing is being able to size the length of the window and scroll back and forth across it. You can copy from and pasteto the window as well.
I hope this helps. I think it's a great idea to put a TFTP server application on the admins machine for backing up the IOS and running-config of any routers/switches/hardware you may have on your network.
If you need anymore direction on this feel free to send me an e-mail directly.
by chrismorris
by chrismorris
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending