Question Locked

usb driver for integral/akasa 2.5 inch ide enclosure

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

can anyone help me i am looking for a driver for an integral/akasa usb ide enclosure as my win xp and usb port do not recognise the device.
many thanks. (frustrating)

3 replies

by rob miners

Remove and reinstall all USB controllers

To remove and reinstall all USB controllers, follow these steps:
Click Start, click Run, type sysdm.cpl in the Open box, and then click OK.
Click the Hardware tab.
Click the Device Manager button.
Expand Universal Serial Bus controllers.
Right-click every device under the Universal Serial Bus controllers node, and then click Uninstall to remove them one at a time.
Restart the computer, and then reinstall the USB controllers.
Plug in the removable USB storage device, and then test to make sure that the issue is resolved.

by oh smeg

Is that the HDD needs to be set to master before it can be used. Depending on the make of the drive it may require that the Jumper be removed from the drive or if there is not one fitted you may need to fit one.

There are 6 pins that do not get plugged into the Enclosure which are what is used to set the Drive to Master, Slave or Cable Select.

Also if this is a new drive it will need to be Formatted before it can be used so open the Drive Management Window and right click on the Drive and chose the Format Option. If you are asked do you want to prepare this Drive for use select Yes and follow the prompts.

Col

This discussion is closed to new replies.