Ok, there were a few topics similar to this already, but not quite with the setup I am working on.
So, I have 2 Private networks in different city’s
Site A. 192.168.1.x + Dial in VPN with win2k3 using DHCP relay agent to get IP’s from the router
Site B. 192.168.2.x
I have a hardware VPN setup (with 2 d-link routers) between the 2 networks, and both networks can see each other fine as well as ping and do windows shares, HOWEVER people on the dial in VPN can only see the network it is on (192.168.1.x), it does not seem to see the established VPN between the routers.
I’m sure I just have to set a static route in the windows RRAS but have had no luck with it thus far.
Any help would be greatly appreciated If it is a static route, can you give me an example of what i have to set in the fields? if I’m way off, a gentle push in the right direction would be nice
Thanks in advance!
Chad. E
O yeah, also there is only one network card in the Dial in server! (the other one died). It is set to a static IP, outside the DHCP range of the router of Site A.