Discussion Locked

Westell connected to Netgear FVS114

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

How do I configure this WireSpeed Westell Modem with the Netgear VPN FVS114? I have tried disabling the DHCP server within the modem and the Netgear router. The modem is set at 192.168.1.1, then I set the Netgear at 192.168.1.10 and let DHCP server assign IP addresses to the network. If I tried to ping the Westell modem at 192.168.1.1 it won't find it. I bridged the westell modem and that did not work. I removed the NAT capability from the Netgear router and let the westell do the NAT...that did not work. Is there anyone outthere with a suggestion? I would really appreciate your time and help!
Thanks, to all fo you guys in advance!!!

Cordially,
Julian

1 reply

by lamczyknic3000

First, what model of Westell is the modem. The problem could be that you have a faulty modem. Test all your ports, and then make sure your TCP/IP settings are correct. Contact Westell tech support and explain the problem see if they can come to a solution.

This discussion is closed to new replies.